Product family
O-Rings & Seals
Standard and engineered sealing components for static and dynamic service.
Range overview
O-Rings & Seals for process, utility and critical service.
AS568 and metric O-rings, encapsulated and X-ring profiles, spiral wound gaskets, rubber profile seals, bonded washers and custom molded seals. Materials are selected against temperature, media and compression-set requirements.
- Primary standards
- AS568 · ISO 3601 · ASME B16.20 · ASTM D2000
- Supply scope
- Standard and made-to-order configurations; project documentation on request.
Range pages
Select the range
Each range page lists the product types, specifications, ordering data and documents for that group.
Product types
A selection from this family
8 product types are listed in this family. Open a type for specifications, materials, ordering data and documents.
O-Rings
AS568 O-Rings
Standard AS568 sizes in NBR, FKM and EPDM for general sealing duty.
View specifications
O-Rings
Metric O-Rings
Metric-series O-rings for European and imported equipment.
View specifications
O-Rings
Encapsulated O-Rings
PTFE-jacketed O-rings for aggressive chemical and solvent service.
View specifications
O-Rings
X-Ring / Quad Ring
Four-lobe profile with lower friction and improved dynamic sealing.
View specifications
Product media
Moulding, finishing and seal verification.
The sealing film covers O-ring production, material and hardness checks, and the seals and gaskets supplied for static and dynamic service.
- Compression moulding and finishing
- Material, hardness and dimensional checks
- Selection notes for media and temperature
Films and high-resolution photography are shared directly with customers and specifiers.
How to specify
Three inputs are enough to start.
A complete RFQ shortens the review cycle. If a drawing or existing part number is available, include it with the enquiry.
01
Duty and envelope
Size, pressure class, temperature, media and available space. For movement or flow duty, include the calculated range.
02
Material and connection
Pipe or vessel material, flange facing, weld or thread detail, and any sour-service or NACE requirement.
03
Documentation and test
Material certificates, NDE, pressure test, dimensional report and any project specification or data sheet.
Next step
Need help selecting a o-rings & seals configuration?
Send the duty, drawing or existing part number. Engineering and sales will confirm the range, documentation and delivery route.