Product family
Flanges
ASME and custom flange configurations for pipe, vessel and specialty connections.
Range overview
Flanges for process, utility and critical service.
Pipe and specialty flanges in carbon steel, stainless steel and duplex grades, supplied to ASME B16.5, B16.36 and project-specific requirements. Dimensional inspection and material traceability are available on every order.
- Primary standards
- ASME B16.5 · ASME B16.36
- Supply scope
- Standard and made-to-order configurations; project documentation on request.
Range pages
Select the range
Each range page lists the product types, specifications, ordering data and documents for that group.
Product types
A selection from this family
8 product types are listed in this family. Open a type for specifications, materials, ordering data and documents.
Pipe Flanges
Weld Neck Flange
Butt-welded flange with a tapered hub for high-pressure and cyclic service.
View specifications
Pipe Flanges
Slip-On Flange
Economical flange that slips over the pipe and is fillet-welded in place.
View specifications
Pipe Flanges
Blind Flange
Solid flange for isolating or terminating a pipe, valve or vessel connection.
View specifications
Pipe Flanges
Lap Joint Flange
Two-piece flange and stub end assembly for easy bolt-hole alignment.
View specifications
Product media
Machining, facing and inspection.
The flange film follows the production route from material release through facing, drilling and dimensional inspection, with typical pipe and specialty configurations shown in the range.
- Range walk-through and typical configurations
- Facing, drilling and dimensional inspection
- Selection notes for pressure class and facing
Films and high-resolution photography are shared directly with customers and specifiers.
How to specify
Three inputs are enough to start.
A complete RFQ shortens the review cycle. If a drawing or existing part number is available, include it with the enquiry.
01
Duty and envelope
Size, pressure class, temperature, media and available space. For movement or flow duty, include the calculated range.
02
Material and connection
Pipe or vessel material, flange facing, weld or thread detail, and any sour-service or NACE requirement.
03
Documentation and test
Material certificates, NDE, pressure test, dimensional report and any project specification or data sheet.
Next step
Need help selecting a flanges configuration?
Send the duty, drawing or existing part number. Engineering and sales will confirm the range, documentation and delivery route.