Products

Butt-welded flange with a tapered hub for high-pressure and cyclic service.

Economical flange that slips over the pipe and is fillet-welded in place.

Solid flange for isolating or terminating a pipe, valve or vessel connection.

Two-piece flange and stub end assembly for easy bolt-hole alignment.

Compact flange for small-bore high-pressure piping with a socket weld connection.

Tapped flange for small-bore connections where welding is not practical.

Single flange that transitions between two line sizes at a bolted connection.

Tapped flange pair for orifice plates and differential-pressure flow measurement.

Flanged vessel connection with a bore flush to the internal shell surface.

Large-diameter access opening with cover, davit and sealing arrangement.

General-purpose flanged or welded penetration for pressure-vessel service.

Angled penetration for connections that must follow a shell contour or flow path.

Small-bore connection for pressure, temperature and level instruments.

Heavy-wall nozzle that provides reinforcement without a separate pad.

Nozzle with an integral pad for shell connections in stainless and alloy equipment.

Nozzle oriented tangentially to the shell for swirl, mixing or separation duty.

Ring-shaped spray pattern for cooling, washing and gas scrubbing.

Solid-cone spray for uniform coverage and higher impact.

Fan-shaped spray for linear coverage, coating and washing.

Open spiral design that resists clogging in dirty or fibrous service.

Small-droplet nozzle for cooling, humidification and odour control.

Rotating or fixed spray head for vessel and tank interior cleaning.

Compressed-air-assisted nozzle for fine atomization of viscous fluids.

Two-plane angular movement with gimbal rings and pinned hinges.

Universal joint for combined axial, lateral and angular movement.

Balanced bellows arrangement that removes pressure thrust from anchors.

High-temperature bellows joint for thermal growth in process piping.

Standard metallic bellows joint for axial movement and vibration.

Single-plane angular movement with hinge pins and structural supports.

Packed slip-type joint for axial movement in low-maintenance piping.

Elastomeric joint for vibration isolation, movement and corrosive service.

Bladder or diaphragm vessel for pressure stabilization and water hammer control.

Compact device for stable low-flow regulation in process systems.

Large-volume expander for cooling tower and condenser water systems.

Heavy-duty expander for process, utility and industrial water systems.

Low-volume precision unit for analytical and micro-flow systems.

Standard AS568 sizes in NBR, FKM and EPDM for general sealing duty.

Metric-series O-rings for European and imported equipment.

PTFE-jacketed O-rings for aggressive chemical and solvent service.

Four-lobe profile with lower friction and improved dynamic sealing.

Metal and graphite spiral wound gasket for ASME flange joints.

Extruded or molded profile for doors, enclosures and panel sealing.

Rubber-bonded metal washer for sealing threaded fasteners and ports.

Drawing-specific molded seal for non-standard geometries and media.